Microwave 0º (In Phase) Power Divider/Combiner with N type connector up to 18 GHz
Normally, 2-way and 4 way microwave power dividers are the most popular among our customers, the standard products (we often can offer for them rapid delivery) list is shown below in the table. But TUNEFUL CORPORATION RF also offers power dividers up to 9-way or custom built, please, contact the factory for details.
| Part Number | Frequency | Insertion Loss | Isolation | Input | Output | Amplitude Balance | Phase Balance |
| （GHz） | （dB） | （dB） | （VSWR） | （VSWR） | (dB) | ||
| TFPD-STN120-0.72.7 | 0.7-2.7 | 0.4 | 20 | 1.35 | 1.3 | ±0.2 | ±2 |
| TFPD-STN140-0.72.7 | 0.7-2.7 | 0.8 | 20 | 1.35 | 1.3 | ±0.35 | N/A |
| TFPD-STN120-0104 | 1.0-4.0 | 0.6 | 20 | 1.35 | 1.3 | ±0.3 | ±4 |
| TFPD-STN140-0104 | 1.0-4.0 | 1 | 20 | 1.4 | 1.3 | ±0.4 | ±5 |
| TFPD-LTN120-0118 | 1.0-18.0 | 1.5 | 15 | 1.6 | 1.5 | ±0.3 | ±5 |
| TFPD-LTN140-0118 | 1.0-18.0 | 2.8 | 15 | 1.7 | 1.5 | ±0.5 | ±6 |
| TFPD-STN120-0208 | 2.0-8.0 | 0.6 | 20 | 1.4 | 1.3 | ±0.3 | ±4 |
| TFPD-STN140-0208 | 2.0-8.0 | 1 | 18 | 1.5 | 1.4 | ±0.4 | ±4 |
| TFPD-LTN120-0218 | 2.0-18.0 | 1.5 | 16 | 1.5 | 1.5 | ±0.3 | ±5 |
| TFPD-LTN140-0218 | 2.0-18.0 | 2.5 | 16 | 1.6 | 1.5 | ±0.4 | ±6 |
| TFPD-LTN120-0418 | 4.0-18.0 | 1.4 | 18 | 1.5 | 1.5 | ±0.3 | ±4 |
| TFPD-LTN140-0418 | 4.0-18.0 | 2 | 18 | 1.6 | 1.5 | ±0.4 | ±6 |
| TFPD-LTN120-0618 | 6.0-18.0 | 1.3 | 18 | 1.5 | 1.5 | ±0.3 | ±5 |
| TFPD-LTN140-0618 | 6.0-18.0 | 1.8 | 18 | 1.6 | 1.5 | ±0.4 | ±6 |
Microwave 0º (In Phase) Power Divider/Combiner with SMA connector up to 18 GHz
TUNEFUL CORPORATION RF offers one of the broadest choices of SMA microwave power dividers in the market, keeping stock of the hot selling models. For our 0.5-8GHz SMA models which are being offered with 2, 3, 4, 6, 8, 12, 16-way form-factors , you can use very simple order way:
1) Any TUNEFUL CORPORATION RF 0.5-8GHz SMA power divider partnumber starts from TFPD letters;
2) Next letters combination - SLFS - defines the power divider series;
3) Next letter-digit combination designates case type, connector type, number of ways, phase direction - e.g. STS120 - where only first two digits may change: 12- for 2-way, 13 - for 3-way, 14 for 4-way, 16 for 6-way, 18 for 8-way, 22 - for 12-way, 26 - for 16 way power divider;
4) Following 4 digits, e.g. 0.502, define frequency range in GHz: from 0.5 to 8 GHz (please contact us for higher frequency resolution), dot sign is added in case the lower frequency range is not a integer;
Basing on the above explanation TFPD-SLFS-STS120-0.502 will mean 2 way microwave power divider for frequency range from 0.5 to 2 GHz with SMA connectors.
For the power dividers with SMA connectors up to 18 GHz we offer numerous standard models from 2-way to 12-way, which also may be customized or custom-built according to your requirements:
| Part Number | Frequency Range | Insertion | Isolation | Input VSWR | Output VSWR | Amplitude Balance | PhaseBalance |
| Loss | |||||||
| （GHz） | （dB） | （dB） | (dB) | ||||
| TFPD-STSC120-0112.4 | 1.0-12.4 | 1.5 | 16 | 1.4 | 1.3 | ±0.4 | ±6° |
| TFPD-STSC140-0112.4 | 1.0-12.4 | 2.8 | 16 | 1.6 | 1.3 | ±0.5 | ±7° |
| TFPD-STSC180-0112.4 | 1.0-12.4 | 4 | 15 | 1.8 | 1.5 | ±0.8 | ±10° |
| TFPD-STSD120-0218 | 2.0-18.0 | 1 | 16 | 1.5 | 1.5 | ±0.3 | ±5° |
| TFPD-STSD130-0218 | 2.0-18.0 | 1.6 | 16 | 1.8 | 1.5 | ±0.6 | ±10° |
| TFPD-STSD140-0218 | 2.0-18.0 | 1.8 | 16 | 1.65 | 1.6 | ±0.4 | ±6° |
| TFPD-STSD160-0218 | 2.0-18.0 | 2.2 | 16 | 1.8 | 1.5 | ±0.7 | ±8° |
| TFPD-STSD180-0218 | 2.0-18.0 | 3.5 | 15 | 1.8 | 1.5 | ±0.8 | ±10° |
| TFPD-STSE120-0618 | 6.0-18.0 | 0.6 | 18 | 1.5 | 1.5 | ±0.3 | ±5° |
| TFPD-STSE130-0618 | 6.0-18.0 | 1.2 | 18 | 1.6 | 1.5 | ±0.6 | ±6° |
| TFPD-STSE140-0618 | 6.0-18.0 | 1.0 | 18 | 1.6 | 1.5 | ±0.3 | ±6° |
| TFPD-STSE160-0618 | 6.0-18.0 | 1.8 | 18 | 1.8 | 1.5 | ±0.8 | ±10° |
| TFPD-STSE180-0618 | 6.0-18.0 | 1.8 | 18 | 1.8 | 1.5 | ±0.5 | ±8° |
| TFPD-STSE220-0618 | 6.0-18.0 | 2.2 | 16 | 1.8 | 1.5 | ±0.8 | ±10° |
| TFPD-STSE120-0818 | 8.0-18.0 | 0.6 | 18 | 1.5 | 1.5 | ±0.3 | ±5° |
| TFPD-STSE130-0818 | 8.0-18.0 | 1.2 | 18 | 1.6 | 1.5 | ±0.6 | ±6° |
| TFPD-STSE140-0818 | 8.0-18.0 | 1.0 | 18 | 1.6 | 1.5 | ±0.3 | ±6° |
| TFPD-STSE160-0818 | 8.0-18.0 | 1.8 | 18 | 1.8 | 1.5 | ±0.8 | ±10° |
| TFPD-STSE180-0818 | 8.0-18.0 | 1.8 | 18 | 1.8 | 1.5 | ±0.5 | ±8° |
| TFPD-STSE220-0618 | 8.0-18.0 | 2.2 | 16 | 1.8 | 1.5 | ±0.8 | ±10° |
| TFPD-STSB120-0118 | 1.0-18.0 | 1.2 | 16 | 1.5 | 1.5 | ±0.3 | ±5° |
| TFPD-STSB140-0118 | 1.0-18.0 | 2.8 | 16 | 1.7 | 1.5 | ±0.5 | ±8° |
| TFPD-STSB180-0118 | 1.0-18.0 | 4 | 15 | 2.0 | 1.5 | ±0.5 | ±10° |
| TFPD-STSA120-0.518 | 0.5-18.0 | 1.6 | 16 | 1.6 | 1.5 | ±0.4 | ±6° |
| TFPD-STSA140-0.518 | 0.5-18.0 | 4 | 15 | 1.9 | 1.5 | ±0.5 | ±8° |
| TFPD-STSLL120-0.518* | 0.5-18.0 | 1.0 | 16 | 1.6 | 1.4 | ±0.3 | ±5° |
| TFPD-STSLL140-0.518* | 0.5-18.0 | 2.5 | 16 | 1.65 | 1.35 | ±0.35 | ±8° |
* - special Low Loss models
Depending on frequency range and other features, TUNEFUL CORPORATION RF Microwave 0º (In Phase) Power Dividers with SMA connectors have several types of outlines, please, click the links below to get basic outlines for the type of the divider you're interested in (only most popular case styles are shown, for other cases outlines, please, contact the factory):
Microwave 0º (In Phase) Power Divider/Combiner with 2.92 (K) connector up to 40 GHz
| Part Number | Frequency Range | Insertion Loss |
Isolation | Input VSWR |
Output VSWR |
Amplitude Balance |
Phase Balance |
| （GHz） | （dB） | （dB） | (dB) | ||||
| TFPD-STK120-0640 |
6-40 | 1.3 | 16 | 1.7 | 1.5 | ±0.3 | ±5 |
| TFPD-STK140-0640 | 6-40 | 2.0 | 16 | 2.0 | 1.6 | ±0.4 | ±8 |
| TFPD-STK180-0640 | 6-40 | 2.5 | 15 | 2.0 | 1.8 | ±0.5 | ±10 |
| TFPD-NTK120-0240 | 2-40 | 1.8 | 16 | 1.8 | 1.5 | ±0.4 | ±6 |
| TFPD-NTK140-0240 | 2-40 | 3.0 | 16 | 2.0 | 1.6 | ±0.5 | ±10 |
| TFPD-LTK120-0140 | 1-40 | 2.2 | 15 | 2.0 | 1.7 | ±0.5 | ±8 |
Due to its complicated inner circuitry, TUNEFUL CORPORATION RF 40GHz microwave power dividers feature 3 types of the packages, depending on the lower boarder of the frequency range: